<code id="r2umf"></code>

    <del id="r2umf"></del>
    <del id="r2umf"></del>

      <th id="r2umf"><sup id="r2umf"><span id="r2umf"></span></sup></th>
        1.   產品展示
            產品介紹
            產品應用范圍
            產品出廠規范
            致冷器件制冷特點
            器件特征曲線
            產品使用注意事項
            產品信息
             除查詢“所有產品”外,必須要輸入關鍵字,才能查詢
             根據產品序號來查詢時,關鍵字里只能輸入數字。
           
            鴻昌首頁 > 產品出廠規范

          產品出廠規范



          商品名稱:半導體熱電致冷芯片
          型 號:TECl一一系列按致冷組件參數表所列
                TESl一一系列包括微型及多級器件
          包裝要求:外包裝箱為標準瓦楞出口紙箱,內裝泡沫硬盒(不同型號數量不一)。
          外箱尺寸為515*280*300mm
          技術參數及檢驗要求:
          1.每裝運一批次必須隨附檢驗報告。
          2.本公司的檢驗合格報告,證明所檢貨物與為供貨方提供的樣品的參數一致。
          本公司的詳細檢驗項目如下:
          (1)外觀檢驗,包括:a.輕缺陷:表面及邊緣的缺損及不規則:
          b.輕缺陷:表面孔狀缺陷;
          c.輕缺陷:瓷板面及導線有污漬:
          d.重缺陷:外型的不完整,如斷裂或有細微裂紋。
          (2)參數及尺寸檢驗:a.陶瓷尺寸規格:按客戶要求.型號與致冷器件參數表一致:
          b.阻抗規格:同上:
          c.負載電流規格:在額定電壓情況下,與參數表一致:
          d.每一致冷片必須帶有兩根引線,一根為紅色.一根為黑色,長度按客戶要求。
          引線位置為:致冷面朝上,引線朝下本公司產品平均質量水平AQL值為1.5。

          Product standards
          Item: I thermoelectric module
          Model: TEC1 series: refer to thermoelectric Module specification Table
          TES1 series includes mini type and multistage units
          Package: Outer package: corrugated export case
          Inter package: hard foam case (Various quantity to each type)
          Outer size: 515*280* 330mm
          Technical reference and check requirement 10ne quality check report attached to
          each batch 2 the quality check pass report testifies that the product is of the
          equal reference to the samples.
          Content of qual ity check:
          (1)Appearance:
          a. Light defect: and irregularity of surface and edges;
          b. Light defect: hole like defect on surface;
          c. Light defect: sewage on ceramic plate or leads;
          d. Heavy defects: lace of black heat shrinkable tube on the connecting terminal
          of the TE module.
          (2)Check of reference and size:
          a. Standards of ceramic part: in accordance with client requirement.
          b. Standards of resistance: in accordance with client requirement.
          c. Standards of loading current: in accordance with specification table in the
          range of rated voltage.
          d. Position of leads: when cold surface is upward, the leads are downward.
          Average quality level (AQL)of our products is 1.5.

           
           
          Copyright © 2006-2020 河南鴻昌電子有限公司, All Rights Reserved.豫ICP備19039122號
          鴻昌地址:長葛市產業集聚區魏武路東秦公路北側  電話:0374-6221169   6231058  傳真:0374-6228866   6221169
            手機:15393788002  13298216633
          久久久久久精品免费免费直播,东北老富婆高潮大叫对白,看全色黄大色黄女片爽,免费不卡在线观看av